Razer S5

Manufactured to the same exacting standards as the Razer V5, simplified for the real-world requirements of component cutting.

See it in action
Raser S5 Linear Saw for timber and truss frame cutting

Razer S5

Whydo you need it?

  • Streamlined for your plant – and your budget
  • A high power servo motor safely controls the cutting blade
  • Customized material flow options are a standard inclusion
  • Offers one-man operation, with a small footprint, high production rate and room for expansion
  • Comes with ‘Simple‘ optimising software that is easy to use
  • Safe, fast, accurate, reliable and works with all Nail Plate Suppliers
Raser S5 linear truss saw

Is it time to automate your cutting process?

The Razer S5 supports any combination of manual or automated material handling systems, dust extraction and extended waste conveyors.

Like the Razer V5, the S5 saw can be fully customised to meet your exact budget, layout and operational needs.



You get someone on there and within half a day they can operate the saw themselves. They pick it up very easily, without any concerns that they will have an accident, unlike the pull saws.

~Drew, Rainbow Frame and Truss

What we used to cut in a day, the Razer will do in a couple of hours. Also our use of timber has improved. We used to carry a lot more stock and different lengths.

~Drew, Rainbow Frame and Truss

This process has been great, the technicians have been extremely helpful in answering questions on product knowledge and resolving our issues in a timely manner.

~Nathan, Sydney Frames and Trusses
See how they did it

DETAILSCompare the Razer S5 & Razer V5

Saw model Razer Saw V5 Razer Saw S5
Height 2870mm (3180mm with top cover open)
Depth – Saw chamber 1400mm
Depth – with dust funnel & conveyor guard 1930mm
Width – Saw chamber 1580mm
Power Requirements 3ph, 415/480 VAC +/- 10%, 50 Amp , 50/60 Hz
Air Supply 340 l/min at 690 kPa (12 cfm at 100 psi) 400 l/min at 690 kPa (14 cfm at 100 psi)
Saw blade drive Hydraulic motor driven from dedicated power pack 4 kW Servo motor
Saw Blade details 350mm diameter
Throughput – Trusses 250 – 350 Typical truss components per hour*
Throughput – Frames 400 -550 Typical frame components per hour*
Cut specifications Razer Saw V5 Razer Saw S5
Cutting width – Maximum 350mm
Cutting depth – Maximum 90mm (single or double stack)
Cutting length – Maximum Unlimited
Timber length – Minimum 800mm
Member length – Minimum <1mm
Main cut angle 0 to 180 deg
Bevel cut angle -67 deg to +67 deg (35mm Timber) -61 deg to +61 deg (45mm Timber) 45 deg
Cut types Straight, Single/ compound bevel, Taper, Birdsmouth (zero overcut), Trenching (3 sides), Rip, Bevel rip, Notch, Drill. Straight, Single/ compound bevel, Birdsmouth (under/ overcut), Rip, Bevel ri
Number of cuts per member Unlimited
Cut accuracy +-1.5mm Typical*

*Actual results are site dependent with consideration to timber condition and member geometrics.

FAQsabout the S5 Razer Linear Saw

  • What’s  the main difference between the Razer S5 and V5?

    The Razer V5 includes all the bells and whistles. The S5 suits a plant that is primarily interested in cutting common roof truss components and basic non-raking wall frames.

  • What cuts can be achieved with the Razer S5 saw?

    Straight, Single/compound bevel, Birdsmouth (under/overcut), Rip, Bevel rip

  • What production throughput can it support?

    300-350 typical truss components per hour
    450-550 typical frame components per hour

  • How can we optimise with the Razer S5?

    The Razer software known as ‘Simple’, has highly flexible optimisation algorithms that will process thousands of ways to cut a job and come up with the best solution instantly. The best combination for your cutting requirements and specifications, be it saving waste or cost.

  • How is throughput/efficiency compared to the V5?

    Very similar, the S5 will produce the same components generally within the same timeframe, it can also be added to with a P3 Printer, automatic feeds, Packfeeder and everything else!

Got another question? Send us a message

EXPERT Support

As a Vekta customer, you’re our number one priority. When you choose a Vekta product, you choose access to our specialised engineers.

How we support you

More Cutting Automation Solutions

Material Handling

Everything you need to prepare your materials for cutting. Absolute precision, every time.

Intelligent Conveying

Eliminate bottle-necks and keep things moving with our heavy duty post-cutting options.

is it time to automate

It’s a big change, and a big commitment. We understand that and want you to feel as confident as we are when you buy our Australian made machinery.

Talk to an Engineer