WHAT IT DOES
Manufactured to the same exacting standards as the Razer V5, the Razer S5 is simplified to suit a plant primarily interested in cutting common roof truss components and basic, non-raking wall frames.
The result is a less expensive linear saw with features tailored specifically to truss plants.
3D MODEL
features & OPTIONS
- Compatible with ALL NAIL PLATE SOFTWARE
- The industry’s smallest footprint
- Customisable to suit your factory processes; material flow, multiple layout options, location of waste conveyor and dust extraction
- Unsurpassable accuracy and precise cutting that ensures products are to correct specifications
- Modular – automated or manual infeed and outfeed options to suit your budget and needs
- Integrate one or more saws into Vekta’s Direct Delivery System
SPECIFICATIONS
| Throughput | 250-350 truss components /h 400-550 frame components /h |
| Cut accuracy | ±1.5 mm typical |
| Cutting width – max. | 350 mm (150 mm for double stacks) |
| Cutting depth – max. | 90 mm (single or double stack) |
| Cutting length – max. | Unlimited |
| Timber length – min. | 800 mm |
| Member length – min. | <1 mm |
| Main cut angle | 0 -180° |
| Bevel cut angle | 45° |
| Cut types | Straight, Single/Compound Bevel, Taper, Birdsmouth (under/overcut), Rip, Bevel Rip |
| Number of cuts per member | Unlimited |
| Power & air req. | 3 ph, 415/480 VAC ± 10%, 50 A, 50/60 Hz 400 L/min at 690 kPa (14 ft3/min at 100 psi) |
