Razer V5

The smallest footprint, unparalleled throughput. Flexible with bespoke options to suit your cutting needs.

See it in action
white-arrow
Raser V5 Linear Saw for timber and truss frame cutting

Whyyou need the Razer V5?

  • The Razer V5 has the smallest footprint in the industry!
  • Compatible with all nail plate and design software and built to suit your needs
  • All components and add-ons are modular – feel free to install them at any time
  • Cutting edge agile design means it is constantly updating – new cuts, optimisations, cutting programs
  • Any single or multiple cut component required including bevelling, trenching and drilling
  • Capable of cutting, printing & trenching on 2 boards at a time
V5 linear saw

Is it time to automate your cutting process?

The Razer V5 supports any combination of manual or automated material handling systems, dust extraction and extended waste conveyors.

You can fully customise the Razer V5 saw  to meet your exact budget, layout and operational needs.

SEE IT IN ACTION

speech-marks

You get someone on there and within half a day they can operate the saw themselves. They pick it up very easily, without any concerns that they will have an accident, unlike the pull saws.

~Drew, Rainbow Frame and Truss
speech-marks

Not only is the Razer Saw faster, more accurate and safer, it is less physical, reducing the impact on the operator.

~Troy, Dahlsens Ballarat
speech-marks

The Razer saw has improved our production..from speed and accuracy to OHS. It has replaced 2 semi-automated pull saws and has enabled us to cut sharp angles that previously we were unable to. The accuracy of the saw is impressive, and the back-up service is second to none.

~Andrew, Dahlsens Ballarat
speech-marks

..reasons for purchasing a second saw is the printing capabilities that the P3 offers in terms of plate marking and truss component placing. These help the assembly team to work smarter not harder to meet the production levels required to satisfy our customer expectations.

~George, Thompsons ITM
speech-marks

We needed our linear saws to be accurate, reliable, fast and easy to use. Responsive and timely support from the manufacturer was a prime consideration. Once we’d decided on the Razer V5, the install and training by the Vekta team was very positive…

~David, Trussmaster
See how they did it

DETAILSCompare the Razer V5 & Razer S5

Saw model Razer Saw V5 Razer Saw S5
Height 2870mm (3180mm with top cover open)
Depth – Saw chamber 1400mm
Depth – with dust funnel & conveyor guard 1930mm
Width – Saw chamber 1580mm
Power Requirements 3ph, 415/480 VAC +/- 10%, 50 Amp , 50/60 Hz
Air Supply 340 l/min at 690 kPa (12 cfm at 100 psi) 400 l/min at 690 kPa (14 cfm at 100 psi)
Saw blade drive Hydraulic motor driven from dedicated power pack 4 kW Servo motor
Saw Blade details 350mm diameter
Throughput – Trusses 250 – 350 Typical truss components per hour*
Throughput – Frames 400 -550 Typical frame components per hour*
Cut specifications Razer Saw V5 Razer Saw S5
Cutting width – Maximum 350mm
Cutting depth – Maximum 90mm (single or double stack)
Cutting length – Maximum Unlimited
Timber length – Minimum 800mm
Member length – Minimum <1mm
Main cut angle 0 to 180 deg
Bevel cut angle -67 deg to +67 deg (35mm Timber) -61 deg to +61 deg (45mm Timber) 45 deg
Cut types Straight, Single/ compound bevel, Taper, Birdsmouth (zero overcut), Trenching (3 sides), Rip, Bevel rip, Notch, Drill. Straight, Single/ compound bevel, Birdsmouth (under/ overcut), Rip, Bevel ri
Number of cuts per member Unlimited
Cut accuracy +-1.5mm Typical*

FAQ’sabout the Razer V5 Linear Saw

  • What cuts can be achieved with the Razer V5 saw?

    Straight, Single/compound bevel, Taper, Birdsmouth (zero overcut), Trenching (3 sides), Rip, Rebate, Taper, Bevel rip, Notch, Drill. The Razer can also cut a piece of timber rotated on its side!

  • What Production Volume can the Razer V5 support?

    300-350 typical truss components per hour
    450-550 typical frame components per hour

  • Can I check on the statistics?

    Yes! The saw produces its own statistics files and graphs for ease of reading. It can also be setup to automatically report back to your own production software after each piece is cut

  • What parts are needed for the Razer?

    All the smarts are located in the main chamber, with the operator console and intelligent touch screen. The automated infeed (AIT), automated outfeed kickoff (OFK) along with the waste conveyors, dust extractors etc. are all optional and can be added at any time.

  • How can I be sure my Razer V5 is fully optimised?

    The Razer software, ‘Simple’ has highly flexible optimising algorithms that will process thousands of ways to cut a job and come up with the best solution- instantly. The best combination for your cutting requirements and specifications- be it saving waste or cost

Got another question? Send us a message

EXPERT Support

As a Vekta customer, you’re our number one priority. When you choose a Vekta product, you choose access to our specialised engineers.

How we support you

More Cutting Automation Solutions

Material Handling

Everything you need to prepare your materials for cutting. Absolute precision, every time.

Intelligent Conveying

Eliminate bottle-necks and keep things moving with our heavy duty post-cutting options.

is it time to automate

It’s a big change, and a big commitment. We understand that and want you to feel as confident as we are when you buy our Australian made machinery.

Talk to an Engineer